Transition Networks Point System RS232 Copper to Fiber Media Converter

Transition Networks Point System RS232 Copper to Fiber Media Converter (CRS2F3113-100)

1 x DB-9 , 1 x SC Duplex

$328.39 Out of Stock
Quantity:

Description

Transition Networks' serial RS232 to Fiber Media Converter allows you to extend the distance between serial connections with the use of fiber optic cable. This full-featured converter transmits the full complement of RS232 flow control/handshaking signals optically and supports full or half-duplex asynchronous data transmission at speeds up to 115Kb/s.

The diagnostic features included on this converter make installation easy and intuitive. A DTE/DCE switch eliminates the frustration over selecting the appropriate cable. A loop-back switch allows for complete diagnostic testing prior to system turn-up or during troubleshooting. Unit and Port LEDs allow for quick status information of the converter.

Main Features

  • Number of Ports: 2
  • Interfaces/Ports: 1 x DB-9 Serial
  • Interfaces/Ports: 1 x SC Duplex
  • Connectivity: Copper
  • Connectivity: Fiber
  • Connectivity Media: Serial Copper
  • Connectivity Media: 1300 nm Multi-mode Fiber
  • Distance Support: 1.24 Mile
  • Management:
  • Simple Network Management Protocol
  • Report converter status to chassis management software
  • The CRS2F3113-100 can remotely manage the SRS2F31xx-100 (the standalone version of the media converter) or another CRS2F3113-100

    Write operation includes:

  • Local Loop-Back
  • Remote Loop-Back
  • Protocols: SNMP
  • Status Indicators:
  • P (Power)
  • RX
  • FL
  • Power Consumption: 5 W
  • Form Factor: Internal
  • Dimensions: 3.40" Height x 3.40" Width x 5" Depth
  • Additional Information:

    Switches:

  • DTE/DCE
  • Loop-back
  • Loopback (Local or Remote on copper and fiber)

    Supports the following flow control signaling:

  • DCD - Data Carrier Detect
  • RXD - Receive Data
  • TXD - Transmit Data
  • DTR - Data Terminal Ready
  • SG - Signal Ground
  • DSR - Data Set Ready
  • RTS - Request To Send
  • CTS - Clear To Send
  • Compatibility:

    Pointy System Chassis

  • Certifications & Standards:
  • EIA/TIA-574
  • EIA/TIA RS-232E

    Compliance:

  • CISPR22/EN55022 Class A + EN55024
  • EN60950 Class A
  • FCC Class A
  • CE Mark
  • Standard Warranty: Lifetime
  • General Information

    Product TypeMedia Converter
    Brand NameTransition Networks
    ManufacturerTransition Networks, Inc
    Product ModelCRS2F3113-100
    Product NamePoint System RS232 Copper to Fiber Media Converter
    Product LinePoint System
    Manufacturer Part NumberCRS2F3113-100
    Manufacturer Website Addresswww.transition.com
    Marketing Information

    Transition Networks' serial RS232 to Fiber Media Converter allows you to extend the distance between serial connections with the use of fiber optic cable. This full-featured converter transmits the full complement of RS232 flow control/handshaking signals optically and supports full or half-duplex asynchronous data transmission at speeds up to 115Kb/s.

    The diagnostic features included on this converter make installation easy and intuitive. A DTE/DCE switch eliminates the frustration over selecting the appropriate cable. A loop-back switch allows for complete diagnostic testing prior to system turn-up or during troubleshooting. Unit and Port LEDs allow for quick status information of the converter.

    Interfaces/Ports

    Number of Ports2
    Interfaces/Ports1 x SC Duplex

    Media & Performance

    ConnectivityFiber
    Distance Support1.24 Mile
    Connectivity Media1300 nm Multi-mode Fiber

    Management & Protocols

    Management
  • Simple Network Management Protocol
  • Report converter status to chassis management software
  • The CRS2F3113-100 can remotely manage the SRS2F31xx-100 (the standalone version of the media converter) or another CRS2F3113-100

    Write operation includes:

  • Local Loop-Back
  • Remote Loop-Back
  • ProtocolsSNMP

    Controls/Indicators

    Status Indicators
  • P (Power)
  • RX
  • FL
  • Power Description

    Power Consumption5 W

    Physical Characteristics

    Form FactorInternal
    Dimensions3.40" Height x 3.40" Width x 5" Depth

    Miscellaneous

    Certifications & Standards
  • EIA/TIA-574
  • EIA/TIA RS-232E

    Compliance:

  • CISPR22/EN55022 Class A + EN55024
  • EN60950 Class A
  • FCC Class A
  • CE Mark
  • Compatibility

    Pointy System Chassis

    Additional Information

    Switches:

  • DTE/DCE
  • Loop-back
  • Loopback (Local or Remote on copper and fiber)

    Supports the following flow control signaling:

  • DCD - Data Carrier Detect
  • RXD - Receive Data
  • TXD - Transmit Data
  • DTR - Data Terminal Ready
  • SG - Signal Ground
  • DSR - Data Set Ready
  • RTS - Request To Send
  • CTS - Clear To Send
  • Warranty

    Standard WarrantyLifetime
    There are no reviews for this product.