{"product_id":"tripp-lite-by-eaton-b156-003-hd-v2-3-port-displayport-1-2-to-hdmi-mst-hub","title":"Tripp Lite by Eaton B156-003-HD-V2 3-Port DisplayPort 1.2 to HDMI MST Hub","description":"\u003ch5\u003eTripp Lite by Eaton B156-003-HD-V2 3-Port DisplayPort 1.2 to HDMI MST Hub\u003c\/h5\u003e\u003cp\u003eThe B156-003-HD-V2 3-Port DisplayPort 1.2 to HDMI MST Hub connects up to three HDMI monitors to the DisplayPort output on your computer. Ideal for digital signage in schools, churches, conference rooms, trade shows, hotels and retail outlets, this hub allows you to display the same image on all three monitors, extend the desktop across them, or combine all three as one large monitor in video wall mode.The B156-003-HD-V2 is compliant with DisplayPort 1.2 and backward compatible with versions 1.1 and 1.1a with the feature set being limited to that of your equipment. It supports Ultra High Definition (UHD) video resolutions up to 3840 x 2160 (4K x 2K) at 24\/30 Hz. In video wall mode, it supports expanded resolutions, such as 5760 x 1080 in a horizontal 1 x 3 monitor configuration or 1920 x 3240 in a vertical 3 x 1 configuration.This MST hub also supports HDCP, EDID, DDC and 48-bit Deep Color (16 bits per channel), as well as DTS-HD, Dolby TrueHD and 7.1-channel surround sound audio. It works with all operating systems. Plug-and-play convenience means no software or drivers are needed. A built-in six-inch cable connects directly to a DisplayPort source. LEDs indicate when the monitors are receiving a signal. The B156-003-HD-V2 complies with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases. \u003c\/p\u003e\u003cul\u003e \u003cli\u003eComputer with DisplayPort 1.2-compatible graphics card (e.g. AMD Radeon with AMD Eyefinity) required for video wall mode. Backward compatible with most DisplayPort 1.1a equipment running current graphics drivers with feature set limited to that of your equipment. Compatibility with older graphics cards not guaranteed.\u003c\/li\u003e \u003cli\u003eMST compliant graphics cards are limited to a bandwidth of 21.6 Gbps amongst all monitors, with higher resolution monitors using up more bandwidth. 1080p monitors will use up approximately 22% of bandwidth, whereas 4K monitors will use 40% or more. As each monitor will be different, it is necessary to verify the percentage of bandwidth being used by each monitor in the display settings interface for your graphics card. If the total percentage of bandwidth taken up by all of the connected monitors exceeds 100%, an image will not display on one or more of them.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cb\u003eSystem Requirements\u003c\/b\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eComputer with DisplayPort 1.2-compatible graphics card (e.g. AMD Radeon with AMD Eyefinity) required for video wall mode.\u003c\/li\u003e \u003cli\u003eBackward compatible with most DisplayPort 1.1a equipment running current graphics drivers with feature set limited to that of your equipment. Compatibility with older graphics cards not guaranteed.\u003c\/li\u003e \u003cli\u003eMac OS X does not support MST for NVIDIA and Intel Graphics Processor Units, limiting video display on connected monitors to mirror mode.\u003c\/li\u003e \u003cli\u003eMST compliant graphics cards are limited to a bandwidth of 21.6 Gbps amongst all monitors, with higher resolution monitors using up more bandwidth. 1080p monitors will use up approximately 22% of bandwidth, whereas 4K monitors will use 40% or more. As each monitor will be different, it is necessary to verify the percentage of bandwidth being used by each monitor in the display settings interface for your graphics card. If the total percentage of bandwidth taken up by all of the connected monitors exceeds 100%, an image will not display on one or more of them.\u003c\/li\u003e \u003cli\u003eMonitor(s) with HDMI input.\u003c\/li\u003e \u003c\/ul\u003e \u003cul\u003e\u003c\/ul\u003e","brand":"Tripp Lite by Eaton","offers":[{"title":"Default Title","offer_id":52846450770236,"sku":"1035102838","price":149.79,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0864\/2242\/1820\/files\/1035102838.jpg?v=1773086508","url":"https:\/\/www.microcad.ca\/products\/tripp-lite-by-eaton-b156-003-hd-v2-3-port-displayport-1-2-to-hdmi-mst-hub","provider":"Microcad.ca","version":"1.0","type":"link"}