{"product_id":"tripp-lite-by-eaton-dvi-hdmi-over-ip-extender-transmitter-over-cat5-cat6-rs-232-serial-and-ir-control-1920-x-1080-1080p-328-ft-100-m-taa-1-input-device-328-08-ft-range-1-x-network-rj-45-1-x-hdmi-in-1-x-hdmi-out-serial-port-1920-x-1080","title":"Tripp Lite by Eaton DVI\/HDMI over IP Extender Transmitter over Cat5\/Cat6 RS-232 Serial and IR Control 1920 x 1080 (1080p) 328 ft. (100 m) TAA - 1 Input Device - 328.08 ft Range - 1 x Network (RJ-45) - 1 x HDMI In - 1 x HDMI Out - Serial Port - 1920 x 1080","description":"\u003ch5\u003eTripp Lite by Eaton B160-001-HDSI Video Extender Transmitter\u003c\/h5\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe B160-001-HDSI HDMI\/DVI Video + Audio with RS-232 Serial and IR Control over IP Transmitter extends and distributes HDMI or DVI audio\/video, RS-232 serial and IR(infrared) remote signals through a dedicated Ethernet network switch* located up to 328 feet(100 m) away. With an additional 328 feet between the switch and the receiver(sold separately), the total maximum distance from source to display is 656 feet(200 m).\u003cbr\u003e\u003cbr\u003eDesigned for managed network switches with IGMP, which allow login and remote management via switch interface, the B160-001-HDSI displays a single source on a single display or distributes a single signal to multiple displays. You can connect up to 64 transmitters and 255 receivers in a single managed switch installation.**\u003cbr\u003e\u003cbr\u003eThe B160-001-HDSI supports video resolutions up to 1920 x 1440, including 1080p, though it's limited to the maximum resolution of the receiver(sold separately). You can send the HDMI or DVI video source(a DVI adapter cable is included) to any analog or digital display, including VGA and DisplayPort. It extends IR control signals that control a source, such as a Blu-ray™ player, from a remote display, as well as RS-232 signals at serial baud rates up to 57600 Bps.\u003cbr\u003e\u003cbr\u003eCompatible with Tripp Lite's B160-100-DPSI, B160-100-HDSI, B160-200-HSI and B160-100-VSI IP receivers.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*B160-Series designed for use with dedicated network switch. Connecting to a switch used with other networking equipment will result in degraded or non-functional performance.\u003cbr\u003e\u003cbr\u003e**Unmanaged switch installations are limited to two transmitter units. Number of receivers is limited to number of ports remaining on unmanaged switch.\u003c\/p\u003e \u003cp\u003e\u003cb\u003eFeatures\u003c\/b\u003e\u003c\/p\u003e \u003cp\u003e\u003cb\u003eExtends and Distributes HDMI\/DVI A\/V, Serial and IR Control Signals over Cat5\/6 Cabling\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eConverts source video to IP-based signal transmitted to and distributed through network switch\u003c\/li\u003e \u003cli\u003eExtends signal up to 328 ft.(100 m) from switch\u003c\/li\u003e \u003cli\u003eCan also connect directly to receiver up to 328 ft. away\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cb\u003eDesigned for Managed Network Switches with IGMP\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eAllows login and remote management via switch interface\u003c\/li\u003e \u003cli\u003eDisplay single source on single display or distribute single signal to multiple displays\u003c\/li\u003e \u003cli\u003eVideo source(adapter cable included for connecting DVI source) can be sent to any analog or digital display, including VGA and DisplayPort\u003c\/li\u003e \u003cli\u003eConnect up to 64 transmitters and 255 receivers in single managed switch installation\u003c\/li\u003e \u003cli\u003eHDMI output for connecting a local display\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cb\u003eEnhanced Technical Features\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eSupports video resolutions up to 1920 x 1440, including 1080p\u003c\/li\u003e \u003cli\u003eUses H.264 video compression standard\u003c\/li\u003e \u003cli\u003eTransmits on 20-60 kHz IR frequency\u003c\/li\u003e \u003cli\u003eExtends IR control signals that control a source from a remote display\u003c\/li\u003e \u003cli\u003eSupports RS-232 serial baud rates up to 57600 Bps\u003c\/li\u003e \u003cli\u003eHDCP and 3D compatible when paired with an HDMI or DisplayPort receiver(not compatible with VGA receiver)\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cb\u003ePlug and Play Functionality\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eNo software or drivers required\u003c\/li\u003e \u003cli\u003eHardware included for mounting on wall, rack or pole\u003c\/li\u003e \u003cli\u003eCompatible with B160-100-DPSI, B160-100-HDSI, B160-200-HSI and B160-100-VSI IP receivers\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cb\u003eTAA-Compliant\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eCompliant with the Federal Trade Agreements Act(TAA) for GSA Schedule purchases\u003c\/li\u003e \u003c\/ul\u003e","brand":"Tripp Lite by Eaton","offers":[{"title":"Default Title","offer_id":52900415603004,"sku":"1036260968","price":245.86,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0864\/2242\/1820\/files\/1036260968.jpg?v=1773958750","url":"https:\/\/www.microcad.ca\/products\/tripp-lite-by-eaton-dvi-hdmi-over-ip-extender-transmitter-over-cat5-cat6-rs-232-serial-and-ir-control-1920-x-1080-1080p-328-ft-100-m-taa-1-input-device-328-08-ft-range-1-x-network-rj-45-1-x-hdmi-in-1-x-hdmi-out-serial-port-1920-x-1080","provider":"Microcad.ca","version":"1.0","type":"link"}