StarTech.com 8in EPS 8 Pin Power Extension Cable (EPS8EXT)

I have a relatively older power supply in a newer case. The power supply mounts at the bottom of the case and I struggled to get my 8pin CPU power cable to reach to the top…

Pros: Just the perfect length for the Antec DF-85 case. Helped tremendously with cable management.Cons: This product really should be sleeved, I had to sleeve it myself. This is not enough to take off an egg though.Just the perfect length for the Antec DF-85 case. Helped tremendously with cable management. This product really should be sleeved, I had to sleeve it myself. This is not enough to take off an egg though. Antec DF-85
Gigabyte GA-X58A-UD3R
Corsair CMPSU-850HX 850W
Intel Core I7 950 3.06G 45N
2Gx3 Corsair TR3X6G1600
Prolima Megahalems Rev. B
EVGA| 01G-P3-1371-AR GTX460

Temps:
CPU:
Idle: C1 33c C2 29c C3 32c C4 29c
Full Load: C1 51c C2 50c C3 49c C4 50c
GPU: Idle/Load 26c/59c

Pros: Great cable it does just what it was desgined to do, no problems.Cons: NoneGreat cable it does just what it was desgined to do, no problems. None

Pros: This is a nice little package for sleeving fan and power cables.Cons: NoneThis is a nice little package for sleeving fan and power cables. None Just be sure you have a hot hair dryer or heat gun :)

Pros: It works, without any noticeable change whatsoever to performanceCons: too expensive! ends up being 15 bucks with shipping... i was gonna go for the cheap one, which seems to be gone now. oh wellIt works, without any noticeable change whatsoever to performance too expensive! ends up being 15 bucks with shipping... i was gonna go for the cheap one, which seems to be gone now. oh well needed it to route my 8pin behind the motherboard in my p180b. its an antec earthwatts 750 modular, i thought antec would plan according to their own cases.

Pros: Its an 8 pin power extender. It does what its supposed to do.Cons: Not sleeved, but whatever. Its hidden under one of my CPU heatsink's fans.Its an 8 pin power extender. It does what its supposed to do. Not sleeved, but whatever. Its hidden under one of my CPU heatsink's fans. Bought this to extend the 8 pin power from my BFG EX-1200 PSU to my EVGA e760 Classified second 8 pin power in my HAF 932. It does its job just fine.

Pros: I was able to extend the 8-pin CPU connector on my Zalman power supply so I could run it through the back of my Antec 1200 case. It works exactly like it should.Cons: None.I was able to extend the 8-pin CPU connector on my Zalman power supply so I could run it through the back of my Antec 1200 case. It works exactly like it should. None. Probably should have bought a second one to give the cable a little more slack, but a single one works fine.

Pros: It's a wire. It's 8 inches long. It plugs into your mobo! It does its job.Cons: Didn't vacuum my room.It's a wire. It's 8 inches long. It plugs into your mobo! It does its job. Didn't vacuum my room.

Extreme modders like to bury their cables behind the back of the motherboard with some of the newer cases with cutouts. So, in the interest of needing that 12V motherboard power, most PS's do not provide long enough cables. - So, you gotta have this extender. It's not hard to find, but it really upsets me finding all the places that was to sell it for $8.99 - $11.99. It need not cost this much, which is why I am glad to see PCC selling them at a reasonable price in a nice individual bag. - You PC shops, you know you will eventually need them. Stock up on them here, I bought 4.

Pros: It works like it should. I don't have to stretch my power cord to reach my motherboard now.Cons: Shipping cost just as much as the product.It works like it should. I don't have to stretch my power cord to reach my motherboard now. Shipping cost just as much as the product. If I wanted to be picky I could say it doesn't have the black mesh around the chords to match the rest of my case but I could care less.

Pros: Does the job to extend the power cable. Appears to be well made. No problems.Cons: NoneDoes the job to extend the power cable. Appears to be well made. No problems. None

Pros: - Does what it says it does.- Seems pretty high-qualityCons: Did not do my taxes for me.- Does what it says it does.- Seems pretty high-quality Did not do my taxes for me.

Pros: Nice, high quality extension cable.Cons: noneNice, high quality extension cable. none Really helps to have one of these when you have a full sized ATX or bigger case and your PSU is at the bottom!

Pros: It gives you the extra reach to plug it inCons: looks kinda cheap for the priceIt gives you the extra reach to plug it in looks kinda cheap for the price

Pros: Works as intended.Cons: little hard to bend but not really a con.Works as intended. little hard to bend but not really a con.

Pros: Works.Cons: Could be a little cheaper in price.Works. Could be a little cheaper in price. I got two of them in sequence to my MOBO and i'm not seeing any issues.

Pros: It does what it's supposed to do.Cons: A little pricey with shipping...It does what it's supposed to do. A little pricey with shipping... My PSU is mounted on the bottom of my case so I need a few more inches out of the 8-pin mobo connector in order to route it behind the motherboard tray to the connector on the top of the board.

Pros: It wasn't DOA.Cons: Alittle pricey with shipping.It wasn't DOA. Alittle pricey with shipping. Not much to say about it except that it works, and my case is cleaner looking since I can hide that cable better now. It was $15 with shipping, that's the only complaint.

Pros: Works, cheapCons: cables not wrappedWorks, cheap cables not wrapped I just barely needed this for my Antec P180 with a TPQ-850 and Asus P5Q Pro. I routed the EPS cable behind the motherboard tray and it was too stiff to make the tight turn into the socket; this did the trick perfectly.

Pros: Perfect length. It just "comfortably" reached the EPS 8-pin connector on my new Asus P5E3 Mobo from an Odin-GT 800 in a CM-282 HTPC case.Cons: NonePerfect length. It just "comfortably" reached the EPS 8-pin connector on my new Asus P5E3 Mobo from an Odin-GT 800 in a CM-282 HTPC case. None Sleeving. I used an automotive-type flexible wire-loom I already had and it looks "factory"

Pros: It does what it says it will do and does it consistently and well. One of only two 1394 cards certified by DigiDesign for use with ProToolsCons: NoneIt does what it says it will do and does it consistently and well. One of only two 1394 cards certified by DigiDesign for use with ProTools None Simple, solid card

Pros: It does exactly what it should.Cons: Took for ever to be in stock. Would be nice if the wires had a sleeve or tie put on them to keep them together but not a big deal.It does exactly what it should. Took for ever to be in stock. Would be nice if the wires had a sleeve or tie put on them to keep them together but not a big deal.