Description
The XPress-DR+ Device Server enables users to remotely configure, monitor and control PLCs, drives, motion controllers, power equipment, barcode scanners and other serial devices from anywhere over the Net. A versatile, powerful tool for remote management of automation and assembly/packaging equipment at manufacturing sites, automated distribution centers, refinery plants or any industrial setting. It provides complete access and control of virtually any type of equipment with a serial port.
Main Features
Data/Stop Bit: 8 Data Bit8
Data/Stop Bit: 2 Stop Bit2
Flow Control: XON/XOFF
Flow Control: RTS/CTS
Interfaces/Ports: 2 x RJ-45
Interfaces/Ports: 2 x RJ-45 Auto MDI/MDI-X LAN
Data Transfer Rate: 300 Kbps to 230 Kbps Serial
Data Transfer Rate: 100 Mbps Fast Ethernet
Data Transfer Rate: 10 Mbps Ethernet
Management: Internal web server (standard tunneling firmware only) SNMP (read only) Serial login Telnet login DeviceInstaller software
Protocols: TCP/IP
Protocols: ARP
Protocols: ICMP
Protocols: SNMP
Protocols: TFTP
Protocols: HTTP
Protocols: BootP
Protocols: DHCP
Processor: 1 x Lantronix DSTNI-EX 48 MHz
Standard Memory: 256 KB SRAM
Standard Memory: 2 MB Flash Memory
Standard Memory: 2 KB EEPROM
Status Indicators: TX/RX activity per serial Link/Activity per Ethernet port Power/System OK
Input Voltage: 9 V DC to 30 V DC
Power Consumption: 2.30 W Maximum
Temperature: -40°F (-40°C) to 158°F (70°C) Operating
Humidity: 20 to 90% Non-condensing Relative Humidity Operating
Additional Information: ModBus TCP, ModBus ASCII/RTU, DF1 Multi-Master Modem Control DTR, DSR 9-30 VDC or 9-24 VAC with chassis ground 8 KV direct contact, 15KV air discharge, ESD protection on all Serial ports
Certifications & Standards: UL CSA TUV FCC CE FM Class I Div. 2 IEEE 802.3 IEEE 802.3u IEEE 802.3x IEEE 802.3 d
Dimensions: 57 mm Height x 123 mm Width x 88 mm Depth
Weight (Approximate): 210 g
Standard Warranty: 2 Year