StarTech.com 1-Port PCI Express IDE Controller Adapter Card

StarTech.com 1-Port PCI Express IDE Controller Adapter Card (PEX2IDE)

1 x 44-pin IDC Male Ultra ATA/133 (ATA-7) Ultra ATA

$31.28 In Stock
Quantity:

Description

This PCI Express IDE Controller Adapter Card provides a cost-effective way to use legacy drives with modern computers, by converting a PCI Express port into an IDE port. Providing data burst transfer rates of up to 133MBps and support for PIO 0/1/2/3/4 and UDMA 33/66/100/133 operating modes, the IDE controller card offers an efficient way to add an IDE port. A complete dual profile solution, the PCI Express IDE controller card provides both standard and low profile brackets for adapting to slimline or small form factor system applications.

Main Features

  • Host Interface: PCI Express
  • Data Transfer Rate: Up to 1.04 Gbps
  • Drive Support: Up to 2 x Ultra ATA/133 (ATA-7)
  • Drive Type: Ultra ATA/133 (ATA-7)
  • Platform Support: PC
  • Ports: 1 x 44-pin IDC Male Ultra ATA/133 (ATA-7) Ultra ATA
  • Form Factor: Plug-in Card

    • General Information

    Product TypeUltra ATA Controller
    Brand NameStarTech.com
    ManufacturerStarTech.com
    Product Name1-Port PCI Express IDE Controller Adapter Card
    Manufacturer Part NumberPEX2IDE
    Manufacturer Website Addresswww.startech.com
    Marketing Information

    This PCI Express IDE Controller Adapter Card provides a cost-effective way to use legacy drives with modern computers, by converting a PCI Express port into an IDE port. Providing data burst transfer rates of up to 133MBps and support for PIO 0/1/2/3/4 and UDMA 33/66/100/133 operating modes, the IDE controller card offers an efficient way to add an IDE port. A complete dual profile solution, the PCI Express IDE controller card provides both standard and low profile brackets for adapting to slimline or small form factor system applications.

    Technical Information

    Drive TypeUltra ATA/133 (ATA-7)
    Data Transfer RateUp to 1.04 Gbps
    Drive SupportUp to 2 x Ultra ATA/133 (ATA-7)
    Platform SupportPC
    Host InterfacePCI Express

    Interfaces/Ports

    Ports1 x 44-pin IDC Male Ultra ATA/133 (ATA-7) Ultra ATA

    Physical Characteristics

    Form FactorPlug-in Card
    March 17, 2011 rich-e says:
    Pros:: Easy to install,, High quality,, Highly compatible Quick and easy to install. No third parties drivers needed. With four drives on the SATA controller I…
    January 30, 2010 TJS says:
    Does what it's supposed to do, but instructions to get it running were sketchy. I'm using this to adapt my SATA-only motherboard to work with my old IDE hard drive.…
    December 19, 2009 Charles says:
    I have used the product for 6 weeks now. No problem installing. The transfer data rate for me is disappointing. Playing video from a hard drive attached to this…
    December 7, 2009 Glenn says:
    this worked well to and an older IDE drive to my computer with only SATA
    July 15, 2009 Sailorman says:
    Upgraded my motherboard to Asus M4N78 Pro and discovered that the 2nd IDE was for floppy drives. Purchased this board which fit in an available PCI-E (X1) slot.…
    July 3, 2009 Notesmith says:
    This is the way Plug-and-play is supposed to work. An excellent no-grief way to add a legacy IDE channel if you have an unused pci-x slot lying around.
    May 17, 2009 MBCarlton says:
    I needed to adapt an internal IDE Travan 40 tape drive for a client to work in a system with only SATA ports. This worked perfectly the first time with no…
    November 24, 2008 Anonymous says:
    Pros After trying various adapters to use an old IDE drive in my new SATA computer. This one actually worked! Cons none
    November 24, 2008 Anonymous says:
    Pros: After trying various adapters to use an old IDE drive in my new SATA computer. This one actually worked!
    Cons: none

    © 2024 Microcad Computer Corporation. All Rights Reserved.