StarTech.com Bracket for 3.5 Inch Floppy with Bezel (BRACKETFDBK)
Metal
Description
This plastic, floppy-drive adapter bracket lets you install a 3.5in floppy drive into a 5.25in bay._x000D_ A simple solution that lets you position a 3.5in floppy drive in a computer case as needed (without being confined to the 3.5in floppy bay determined by the case layout), the floppy drive adapter bracket features an attractive open-faced black bezel that provides a snug, secured fit for installed drives.
Main Features
RoHS
Package Contents
General Information
Product Type | Mounting Bracket |
Brand Name | StarTech.com |
Manufacturer | StarTech.com |
Product Name | Bracket for 3.5 Inch Floppy with Bezel |
Manufacturer Part Number | BRACKETFDBK |
Manufacturer Website Address | www.startech.com |
Marketing Information | This plastic, floppy-drive adapter bracket lets you install a 3.5in floppy drive into a 5.25in bay._x000D_ A simple solution that lets you position a 3.5in floppy drive in a computer case as needed (without being confined to the 3.5in floppy bay determined by the case layout), the floppy drive adapter bracket features an attractive open-faced black bezel that provides a snug, secured fit for installed drives. |
Physical Characteristics
Material | Metal |
Miscellaneous
Green Compliance | Yes |
Green Compliance Certificate/Authority | RoHS |
Certifications & Standards | RoHS |
Compatibility | |
Package Contents | |
Additional Information |
April 29, 2011
dilbert says:
Does what it supposed to, and was low priced. Plastic matches my case so it look good.
April 15, 2011
Phil says:
The screws don't fit in anything, I had to use my own screws to mount it. Otherwise, it works
April 1, 2011
cardoc says:
It works just like it should
March 28, 2011
The Builder says:
This product is not much for show(does not match the mesh 3.5 adapter in my Cooler Master 922), but it serves it purpose. So if it's not broke don't fix it!
January 15, 2011
Rich says:
Fit the bill perfectly. I needed to install a 3.5 card reader into a 5 drive opening and this was a quick inexpensive way to go. Easy installation an no problems lining up all the screw holes.
January 1, 2011
AA9DT says:
Snaps in and bolts in tightly. Looks just like a factory original. Fits my 3.5-inch card reader perfectly. Some people complain that this insert isn't aluminum. I wish…
December 5, 2010
Buggsy says:
I was updrading my oldest system P-III and need to add USB ports to the front of the tower. It did the job just fine with the exception of needing to use different…
October 28, 2010
azwonder says:
slid a card reader into this with no problem and the adapter into the case easily - all in about 3 minutes - looks great - perfect to add small components to…
September 2, 2010
RoadTech says:
Maybe I'm from another time but this adapter should not cost more that $0.50. That's 50 cents. It does in fact do what it's supposed to but it's really cheap.
August 30, 2010
Jerry says:
COST: Maybe I'm just from another time, but I worked in factories in New England making plastic parts around 1970, it didn't take that much effort or material.…
August 29, 2010
Anonymous says:
Item works fine to hold my card reader in place, though the bracket and card reader flop around on one side on a HAF-932 case. I will use a screw to hold right…
August 12, 2010
fxitup says:
Friggen great for the price. works just right... as it should
June 20, 2010
cchorto says:
Fits fine, installed quick; less than a minute!
June 12, 2010
Riz says:
This product functions exactly as intended and makes for a nice, clean installation. Unfortunately, the product I bought to fit into it had to be returned. But…
June 8, 2010
Big Blue says:
What can I say, its a bracket... Its cheap does the job and I had no problems. I didnt have to modify it.
May 20, 2010
Anonymous says:
Used to mount a 3.5 card reader in my Corsair 800D case. Lined up perfectly. Somewhat flimsey plastic but that is okay, once it's mounted I'm not going to be…
March 31, 2010
Anonymous says:
Does what it's supposed to do. Used it to mount 3,5 fan control. Had to drill out new mounting holes; existing ones from factory did not line up with my case.…
February 5, 2010
nork says:
Bit flimsy but the price is right and it works. Fast shipping too!
January 25, 2010
Olicat says:
Cheap price and works great with my Memory Card Reader.
January 9, 2010
Dustin says:
This worked exactly as I planned and for a cheap price! The one I saw on another site was twice as expensive so I chose this one and could not be happier!
January 5, 2010
Relieved says:
but I had to file down the end of my Rosewill multi-card reader to make it fit in this adapter. I don't know if the opening is too small or the card reader was too big.
March 27, 2009
Jakeman97 says:
Worked perfectly for my 3.5 floppy and 3.5 media card reader. The fit between the faceplate and the case was good with negligeble gapping noted.
Note* As I recall these brackets used to be made of metal with a plastic faceplate. Now even the carrier is plastic. Therefore, only 4 Stars. Can't complain for the price though.
Note* As I recall these brackets used to be made of metal with a plastic faceplate. Now even the carrier is plastic. Therefore, only 4 Stars. Can't complain for the price though.
September 17, 2008
Ed Edwards says:
Quick and easy way to mount the I/O manifold on the front panel for a computer w/o a floppy drive outlet.