Telehook TH-WH-PJ-FM Universal Projector Ceiling Flush Mount (TH-WH-PJ-FM)

I was sure it was so quick to set up, but it was not , why someone design something like that? sure it can be used with many different products but the way they…

Go this for my Epson Projector and it took some time to figure out the instalation process. Once acheived it works great.

Easy to install. worked as well as hoped for!

It was the cheapest and had holes in the right places for my opt0ma hd65 projector. The problem with this is the bolts and nuts used to hold it together, are also…

well, it's looked great hanging on the ceiling. easy to adjust. one issue i had was that it may get a little hard to turn the screw at first opened. But after all…

This mounted my Optoma HD20 perfectly. The mount is close enough to the ceiling that I didn't have to adjust the keystone.

For a universal mount, this product is quite versatile. It gives you all the necessary accessories to pull of what you want to accomplish and will give you swivel and…

As per the previous reviews, there is lots of hardware but it is needed for the many combinations that exist with today's and yesteryear's projectors. The…

Lots of hardware let me tell you. Used it to mount an Optoma HD65 and it did the job.

Heavily constructed. Fit my projectors perfectly. (I have a variety of projectors from the 90's upto a more recent 1080p unit.) each worked easily! Easy to use…

This product worked well. It holds my projector securely to the ceiling with no issues. It is adjustable, also, so it will hold probably any projector. Easy,…

This little mount worked great for my Epson projector. I needed a mount that was close to the ceiling and was white - this fit the bill. I do wish then included…

easy to install, keeps projector steady and cheapest

Great quality, however, I was unable to use it with the Peerless Ceiling plate. There is no tube routing for the cables. I like the product, but there should be…

This mount is tough enough for most projectors. The price is affordable. The instructions were clear and detailed. The quality of the mounts and even the paint…

The, Easy Disconnection Point, was brutally hard to remove even AFTER I finally removed the bolt. The projector mounting Allen bolts were factory tightened too…

Looked like a great mount, except I could not install it. The factory tightened the allen bolts down soo hard, I actually broke an allen wrench attempting to…

I bought this for my BenQ projector. It was a simple setup and didn't take more than 20min to mount it to the ceiling and set my projector up on the wall. It weighs…

What more could i ask for. Easy, secure install.

Bought this mount for my Optoma DV-11 hoping it would work as several others I have tried just didn't do it.This one is fantastic absolutely all hardware…

I paid 600 on this site for this projector and am totally satisfied.

Pros: Cools well and easy to install. Was expecting a bit more though. my e6750 is @ 3.6GHz, room temp is 75F and coretemp reads 55C under load after 10 minutes. Doesnt go up from there though.Cons: Price dropped three weeks after purchase :(Cools well and easy to install. Was expecting a bit more though. my e6750 is @ 3.6GHz, room temp is 75F and coretemp reads 55C under load after 10 minutes. Doesnt go up from there though. Price dropped three weeks after purchase :(

Pros: Cools well and easy to install. Was expecting a bit more though. my e6750 is @ 3.6GHz, room temp is 75F and coretemp reads 55C under load after 10…

Pros: Easy to install, had screws for my Optoma HD65, easy to adjust. ...Cons: Could use some color choices, but matched my projector nicely.

Pros: Easy to install, had screws for my Optoma HD65, easy to adjust.Cons: Could use some color choices, but matched my projector nicely.Easy to install, had screws for my Optoma HD65, easy to adjust. Could use some color choices, but matched my projector nicely.

The Telehook Universal Projector Flush Mount is exceptionally versatile, and its works well with most projectors weighing up to 33 pounds. It features a 5-inch…

The hardest part of puting up my new mount was a trip to the hardware store to get a stud-finder! Easy assembly, all the parts needed to mount just about any…

Pros: Works great, easy to install, adjust, and looks good.Cons: I had to spend $15 to get some nice drywall anchors to hold it in my ceiling. Not really a big issue considering the price of the mount.Works great, easy to install, adjust, and looks good. I had to spend $15 to get some nice drywall anchors to hold it in my ceiling. Not really a big issue considering the price of the mount. Holds my 5lb projector like a champ.

Pros: Compact, universal, and fairly easy to install, and if you have white or cream color walls it blends in nicely, what more could you ask for?Cons: Mixed hardware configuration is a bit annoying; some parts require you to use a phillips and an allen key at the same time, or two different sized allen keys on a part that requires you to have a grip on both parts, basically just make sure you have your own set of tools on hand.Compact, universal, and fairly easy to install, and if you have white or cream color walls it blends in nicely, what more could you ask for? Mixed hardware configuration is a bit annoying; some parts require you to use a phillips and an allen key at the same time, or two different sized allen keys on a part that requires you to have a grip on both parts, basically just make sure you have your own set of tools on hand. some people complained about shaking or vibrations, i found that first if you tighten all your parts down correctly i didnt get any vibration between the projector and the mount, second if you mount in an apartment or into drywall it can vibrate due to external sources.

Pros: Definitely universal mount. Works great with a Mitsubishi HC1500.Cons: Left over partsDefinitely universal mount. Works great with a Mitsubishi HC1500. Left over parts

No complaints...supporting a 13lb projector. The only challenge you may have is centering the mount over the point of equilibrium on the projector. Additionally, small adjustments are a bit challenging, but nothing a little time and effort won t fix.

Pros: Reasonably cheap, easy on/off capability lets you take out one screw and a metal tab and the projector is off.Cons: Because of the easy on/off capablility that is held up by only one bolt it is impossible to lock it down tight enough so that it doesn't cause vibration. We are using a projector with three mount points and a pretty large internal fan. When the fan kicks into high gear it causes a slight vibration on the screen.Reasonably cheap, easy on/off capability lets you take out one screw and a metal tab and the projector is off. Because of the easy on/off capablility that is held up by only one bolt it is impossible to lock it down tight enough so that it doesn't cause vibration. We are using a projector with three mount points and a pretty large internal fan. When the fan kicks into high gear it causes a slight vibration on the screen. Do not use this in a drop-down (fake) ceiling with ceiling tiles. This mount is designed to screw into a solid ceiling (not drywall or ceiling tiles).

I can't say enough good things about this mount! It is well worth the 79.99 for this mount. I bought it with the ViewSonic PJ506D projector. It took me less than 15…

Pros: Works well with a BenQ... Took 10mins to realize they used little rubber buttons in the mount holes for the screws. Nice shallow mount to boot. If your project fan blows downward (that's up when upside down) think twice.Cons: Non height adjustable - but it's 5" from the ceiling to the projector. In a home theater this is IDEAL.Works well with a BenQ... Took 10mins to realize they used little rubber buttons in the mount holes for the screws. Nice shallow mount to boot. If your project fan blows downward (that's up when upside down) think twice. Non height adjustable - but it's 5" from the ceiling to the projector. In a home theater this is IDEAL. It's white so it blends with most ceiling paint. It's shallow which makes it perfect for home theater installations (less head shadows in the screen).

Pros: Well made mount. Tons of different combos for different projectors. Client was impressed since he had paid several hundred for one in his home theater.Cons: Could use better instructions, but overall I had little issue with them.Well made mount. Tons of different combos for different projectors. Client was impressed since he had paid several hundred for one in his home theater. Could use better instructions, but overall I had little issue with them.

Well built from heavy gauge steel. Included numerous adapter arms, spacers and screws in different lengths and diameters. I'm guessing this mount would work with…

Wide range of applicability - this will literally work with just about any projector. I was amazed it even had the right screws for my machine - I was expecting…

I don't know that you could ask for much more in a projector mount: wide degree of pitch, yaw, and roll, and enough hardware to accommodate most projectors.…

I bought this projector mount for an Epson Home 10+ projector. It was not the easiest to figure out, and the instructions aren't much help, but you need to remember…