Description
Tripp Lite's APSINT3636VR DC-to-AC inverter with automatic line-to-battery transfer and integrated charging system serves as an extended run UPS, a standalone power source or an automotive inverter. Supplies up to 3600 watts of continuous 230V AC power from any 36V battery or automotive DC source. When hardwire AC input is energized, commercial power passes through to connected equipment and the battery set is recharged via 3 stage, 30 amp charging system. In UPS mode, the APS system responds to blackouts and severe voltage fluctuations with a near instantaneous automatic transfer to battery-derived AC output. Includes a set of high current DC input terminals for simple installation (user supplies batteries and cabling - see owner's manual for recommendations). Passes sine wave utilty or generator power during battery charging and UPS line power operation, plus efficient PWM sine wave AC output in inverter and UPS backup modes. Built-in Automatic Voltage Regulation (AVR) corrects line power AC brownouts and overvoltages without using battery power during battery charging and UPS standby modes. Reliable large transformer design, with frequency control powers resistive electronic loads or large inductive motors, compressors and other items with high current needs on startup. Included APSRM4 wired remote power switch with full status LEDs provides remote
Main Features
Plug/Connector Type: Hardwired
Receptacles: Hardwired
Status Indicators: AC Present On Battery Overload Battery Voltage Level (high, medium, & low)
Input Voltage: 36 V DC
Input Voltage: 230 V AC
Input Voltage Range: 30 to 45 V DC
Output Voltage: 230 V AC Nominal
Output Voltage: 36 V DC
Frequency: 50 Hz ±0.3Hz
Input Current: 114 A @ 36 V DC
Input Current: 30 A @ 230 V AC
Load Capacity: 3.60 kW Continuous Power / 7.20 kW Peak Power
Waveform Type: Pulse-width Modulated Sine Wave
Switching Time: 6 ms
Temperature: 32°F (0°C) to 104°F (40°C) Operating
Humidity: 0% to 95% Non-condensing Relative Humidity Operating
Color: Black
Dimensions: 184 mm Height x 216 mm Width x 413 mm Depth
Weight (Approximate): 27.67 kg
Additional Information: DC Input: Requires 36 VDC input source capable of delivering 114 A AC Input: 230 VAC AC Output: 230 VAC nominal DC Charger Output: 36 VDC nominal DC Input connection type: Set of DC bolt-down terminals AC Input connection type: Hardwire via built in junction box with cover plate Cooling method: Fan Transfer time from line power to battery mode: 4 to 6 milliseconds Low voltage transfer to battery power: User configurable to 144V, 163V, 182V & 201V High voltage transfer to battery power: User configurable to 259 to 278V Frequency control for operating stability Resettable circuit breaker protects APS against system overload RJ45 port allows connection of APS remote switch (part# APSRM) Switch allows user to select between off, auto-invert and charge-only settings Advanced 30 amp, 3-stage battery charger and selector switch for gel or wet cell batteries Allows unlimited runtime capability by allowing the use any number of user-supplied batteries Battery runtime is dependent upon the size and number of user-supplied batteries in 36-volt configuration Overload protection: Includes 12 A input breaker dedicated to the charging system and 20 A output breaker for AC output loads
Package Contents: APS PowerVerter INT APSINT3636VR Power Inverter With ChargerAPSINT3636VR Inverter/ChargerInstruction manual with warranty informationWired Remote Switch with full LED status indicators (model APSRM4)
Compatibility: Compatible with marine, automotive, telecom, computer, emergency and a variety of other applications.
Package Contents
APS PowerVerter INT APSINT3636VR Power Inverter With ChargerAPSINT3636VR Inverter/ChargerInstruction manual with warranty informationWired Remote Switch with full LED status indicators (model APSRM4)