Description
Tripp Lite's APS1250 DC-to-AC inverter with automatic line-to-battery transfer and integrated charging system serves as an extended run UPS, a standalone power source or an automotive inverter. Supplies up to 1250 watts of continuous 120V AC power to 2 AC outlets from any 12V battery or automotive DC source. OverPower inverter output feature temporarily provides up to 150% of the continuous output for 1-60 minutes and DoubleBoost inverter output feature delivers up to 200% of the continuous output for up to 10 seconds, providing the extra power needed to cold start heavy-duty tools and motorized equipment. When AC cable is connected to a live wall socket, commercial power passes through to connected equipment and the battery set is recharged via 3 stage, 30 amp charging system. In UPS mode, the APS system responds to blackouts and voltage fluctuations with a near instantaneous automatic transfer to battery-derived AC output. Includes a set of high current DC input terminals for simple installation (user supplies batteries and cabling - see owner's manual for recommendations). Passes sine wave utility or generator power during battery charging and UPS line power operation, plus efficient PWM sine wave AC output in inverter and UPS backup modes. Reliable large transformer design, with frequency control powers resistive electronic loads or large inducti
Main Features
Plug/Connector Type: NEMA 5-15P
Receptacles: 2 x NEMA 5-15R
Protection Type: Overload Protection - Resettable circuit breaker
Input Voltage: 12 V DC
Input Voltage: 120 V AC
Input Voltage Range: 12 to 15 V DC
Output Voltage: 120 V AC ±5 V AC Nominal
Frequency: 60 Hz ±0.3Hz
Input Current: 127 A @ 12 V DC
Input Current: 12 A @ 120 V AC
Load Capacity: 1.25 kW Continuous Power / 2.50 kW Peak Power
Waveform Type: Pulse-width Modulated Sine Wave
Switching Time: 6 ms
Temperature: 32°F (0°C) to 104°F (40°C) Operating
Humidity: 0% to 95% Non-condensing Relative Humidity
Color: Black
Power Cord/Cable: 1.83 m
Dimensions: 178 mm Height x 222 mm Width x 229 mm Depth
Weight (Approximate): 12.70 kg
Additional Information: Frequency control for operating stability Coated internal circuit boards offer continuous operation in humid environments Advanced 30 amp, 3-stage battery charger and selector switch for gel or wet cell batteries 6 diagnostic LEDs indicate AC present, on battery, charge rate, overload & battery voltage level (high, medium & low) Functions as an extended run UPS system, standalone power source and automotive inverter AC input cord and auto-transfer to enable battery charging and automatic UPS support for blackouts & brownouts RJ45 port allows connection of APS/PowerVerter Remote Switch (manuf# APSRM4) Switch allows user to select between off, auto-invert/remote and charge-only settings Configuration switches to allow the user to select the high and low voltage
Package Contents: PowerVerter APS 1250W InverterAPS1250 Inverter/ChargerInstruction manual with warranty information
Standard Warranty: 1 Year
Package Contents
PowerVerter APS 1250W InverterAPS1250 Inverter/ChargerInstruction manual with warranty information