Description
Tripp Lite's APS3636VR 3-function DC-to-AC inverter with auto line-to-battery transfer and integrated charging system serves as an extended run, line interactive UPS or a standalone power source. Supplies up to 3600 watts of continuous 120V AC power from a 36V DC source. When hardwire input AC cable is energized, regulated commercial power passes through to connected equipment and the battery set is recharged via 3 stage, 30 amp charging system. Built-in voltage regulation adjusts brownouts and overvoltages back to usable levels without using battery power. In UPS mode, the APS system responds to blackouts and brownouts with an uninterrupted transfer to battery-derived AC output.
PowerVerter APS Inverters accommodate "peak surge" demands by delivering more output power than their continuous rating. A DoubleBoost feature provides up to 200% of the continuous output for up to 10 seconds, providing the extra power needed to cold start heavy-duty tools and equipment. An OverPower feature delivers up to 150% of the continuous output for up to 1 hour.
Main Features
Plug/Connector Type: 2 x Hardwired
Receptacles: Hardwired
Protection Type: Overload Protection - 30A input breaker and 30A output breaker
Input Voltage: 36 V DC
Input Voltage Range: 30 to 45 V DC
Output Voltage: 120 V AC ± Nominal
Frequency: 60 Hz ±0.3Hz
Input Current: 114 A @ 36 V DC
Input Current: 30 A @ 120 V AC
Load Capacity: 3.60 kW Continuous Power / 7.20 kW Peak Power
Waveform Type: Pulse-width Modulated Sine Wave
Switching Time: 6 ms
Temperature: 32°F (0°C) to 104°F (40°C) Operating
Humidity: 0% to 95% Non-condensing Relative Humidity
Color: Black
Dimensions: 184 mm Height x 216 mm Width x 413 mm Depth
Weight (Approximate): 27.67 kg
Additional Information: Advanced 30 amp, 3-stage battery charger and selector switch for gel or wet cell batteries Resettable circuit breaker protects APS against system overload Switch allows user to select between off, auto-invert and charge-only settings 6 diagnostic LEDs indicate AC present, on battery, overload, & battery voltage level (high, medium, & low) Configuration switches to allow the user to select the high and low voltage for the unit to automatically transfer from AC power to battery backup RJ45 port allows connection of APS remote switch Allows unlimited runtime capability by allowing the use any number of user-supplied batteries Low voltage transfer to battery power:User configurable to 75V, 85V, 95V & 105V High voltage transfer to battery power:User configurable to 135V, 145V Cooling method:Fan Mounting slots enable permanent placement of inverter on any horizontal surface
Package Contents: APS3636VR Inverter/Charger Instruction manual with warranty information
Compatibility: Typical Applications:
Extended Run UPS Configure as a UPS for long-term battery support of telecom systems, security alarms, computer systems and various other motorized and electronic loads Standalone Power Alternative power source for use in off-grid, backwoods, alternative energy and export applications where commercial power is not continuously available
Standard Warranty: 1 Year
Package Contents
APS3636VR Inverter/Charger Instruction manual with warranty information