Tripp Lite PowerVerter APS X APSX750 Power Inverter/Charger

Tripp Lite PowerVerter APS X APSX750 Power Inverter/Charger (APSX750)

12V DC, 230V AC - 230V AC - , 12V DC - Continuous Power:750W

$633.79 Out of Stock
Quantity:

Description

Tripp Lite's APSX750 DC-to-AC inverter with automatic line-to-battery transfer and integrated charging system serves as an extended run UPS, a standalone power source or an automotive inverter. Supplies up to 750 watts of continuous 230V AC power to 2 AC outlets from any 12V battery or automotive DC source. OverPower inverter output feature temporarily provides up to 150% of the continuous output for 1-60 minutes and DoubleBoost inverter output feature delivers up to 200% of the continuous output for up to 10 seconds, providing the extra power needed to cold start heavy-duty tools and motorized equipment. When AC cable is connected to a live wall socket, commercial power passes through to connected equipment and the battery set is recharged via 3-stage, selectable 5/20 amp charging system. In UPS mode, the APS system responds to blackouts and voltage fluctuations with a near instantaneous automatic transfer to battery-derived AC output. Includes a set of high current DC input terminals for simple installation (user supplies batteries and cabling - see owner's manual for recommendations). Passes sine wave utility or generator power during battery charging and UPS line power operation, plus efficient PWM sine wave AC output in inverter and UPS backup modes. Reliable large transformer design, with frequency control powers resistive electronic loads or

Main Features

  • Plug/Connector Type: IEC 60320 C14
  • Receptacles: 2 x IEC 320 EN 60320 C13
  • Status Indicators:

    Front Panel LEDs: Set of 6 LEDs offer continuous status information on load percentage (6 levels reported) and battery charge level (7 levels reported)

  • Input Voltage: 12 V DC
  • Input Voltage: 230 V AC
  • Input Voltage Range: 10 to 15 V DC
  • Output Voltage: 230 V AC ±5% Nominal
  • Output Voltage: 12 V DC Nominal
  • Frequency: 50 Hz ±0.3Hz
  • Input Current: 72 A @ 12 V DC
  • Input Current: 6.20 A @ 230 V AC
  • Load Capacity: 750 W Continuous Power / 1.50 kW Peak Power
  • Waveform Type: Pulse-width Modulated Sine Wave
  • Switching Time: 6 ms
  • Temperature: 32°F (0°C) to 104°F (40°C) Operating
  • Humidity: 0% to 95% Non-condensing Relative Humidity Operating
  • Color: Black
  • Power Cord/Cable: 1.83 m Input
  • Dimensions: 229 mm Height x 222 mm Width x 229 mm Depth
  • Weight (Approximate): 8.44 kg
  • Additional Information:
  • Frequency control for operating stability
  • RJ45 port allows connection of APS/PowerVerter Remote Switch
  • Switch allows user to select between off, auto-invert and charge-only settings
  • Advanced 20 amp, 3-stage battery charger and selector switch for gel or wet cell batteries
  • Coated internal circuit boards offer continuous operation in humid environments (0-95%, non-condensing)
  • Configuration switches to allow the user to select the low voltage for the unit to automatically transfer from AC power to battery backup
  • Low voltage transfer to battery power: User configurable to 144V, 163V, 182V & 201V Overload protection: Includes 3A input breaker dedicated to the charging system and 4A output breaker for AC output loads
  • DC Input Voltage: 12 VDC
  • AC Input Voltage: 230 VAC
  • DC Charger Output Voltage: 12 VDC
  • AC Output Voltage: 230 VAC
  • AC Plug Type: IEC-320 C14
  • DC Plug Type: Set of 2 DC bolt-down terminals
  • Outlet/Receptacle Type: IEC-320 C13
  • Package Contents:
  • PowerVerter APS X APSX750 Power Inverter/Charger
  • APSX750 Inverter/Charger
  • Instruction manual with warranty information
  • Compatibility:

    Compatible with marine, automotive, telecom, computer, emergency and a variety of other applications

    • Package Contents

  • PowerVerter APS X APSX750 Power Inverter/Charger
  • APSX750 Inverter/Charger
  • Instruction manual with warranty information

    • General Information

    Product TypePower Inverter
    Product SeriesAPS X
    Brand NameTripp Lite
    ManufacturerTripp Lite
    Product ModelAPSX750
    Product NamePowerVerter APS X APSX750 Power Inverter/Charger
    Product LinePowerVerter
    Manufacturer Part NumberAPSX750
    Manufacturer Website Addresswww.tripplite.com
    Marketing Information

    Tripp Lite's APSX750 DC-to-AC inverter with automatic line-to-battery transfer and integrated charging system serves as an extended run UPS, a standalone power source or an automotive inverter. Supplies up to 750 watts of continuous 230V AC power to 2 AC outlets from any 12V battery or automotive DC source. OverPower inverter output feature temporarily provides up to 150% of the continuous output for 1-60 minutes and DoubleBoost inverter output feature delivers up to 200% of the continuous output for up to 10 seconds, providing the extra power needed to cold start heavy-duty tools and motorized equipment. When AC cable is connected to a live wall socket, commercial power passes through to connected equipment and the battery set is recharged via 3-stage, selectable 5/20 amp charging system. In UPS mode, the APS system responds to blackouts and voltage fluctuations with a near instantaneous automatic transfer to battery-derived AC output. Includes a set of high current DC input terminals for simple installation (user supplies batteries and cabling - see owner's manual for recommendations). Passes sine wave utility or generator power during battery charging and UPS line power operation, plus efficient PWM sine wave AC output in inverter and UPS backup modes. Reliable large transformer design, with frequency control powers resistive electronic loads or

    Technical Information

    Receptacles2 x IEC 320 EN 60320 C13
    Plug/Connector TypeIEC 60320 C14
    Status Indicators

    Front Panel LEDs: Set of 6 LEDs offer continuous status information on load percentage (6 levels reported) and battery charge level (7 levels reported)

    Power Description

    Input Voltage Range10 to 15 V DC
    Frequency50 Hz ±0.3Hz
    Input Current6.20 A @ 230 V AC
    Load Capacity750 W Continuous Power / 1.50 kW Peak Power
    Switching Time6 ms
    Waveform TypePulse-width Modulated Sine Wave
    Input Voltage230 V AC
    Output Voltage12 V DC Nominal

    Environmental Conditions

    Humidity0% to 95% Non-condensing Relative Humidity Operating
    Temperature32°F (0°C) to 104°F (40°C) Operating

    Physical Characteristics

    ColorBlack
    Power Cord/Cable1.83 m Input
    Dimensions229 mm Height x 222 mm Width x 229 mm Depth
    Weight (Approximate)8.44 kg

    Miscellaneous

    Compatibility

    Compatible with marine, automotive, telecom, computer, emergency and a variety of other applications

    Package Contents
  • PowerVerter APS X APSX750 Power Inverter/Charger
  • APSX750 Inverter/Charger
  • Instruction manual with warranty information
    • Additional Information
  • Frequency control for operating stability
  • RJ45 port allows connection of APS/PowerVerter Remote Switch
  • Switch allows user to select between off, auto-invert and charge-only settings
  • Advanced 20 amp, 3-stage battery charger and selector switch for gel or wet cell batteries
  • Coated internal circuit boards offer continuous operation in humid environments (0-95%, non-condensing)
  • Configuration switches to allow the user to select the low voltage for the unit to automatically transfer from AC power to battery backup
  • Low voltage transfer to battery power: User configurable to 144V, 163V, 182V & 201V Overload protection: Includes 3A input breaker dedicated to the charging system and 4A output breaker for AC output loads
  • DC Input Voltage: 12 VDC
  • AC Input Voltage: 230 VAC
  • DC Charger Output Voltage: 12 VDC
  • AC Output Voltage: 230 VAC
  • AC Plug Type: IEC-320 C14
  • DC Plug Type: Set of 2 DC bolt-down terminals
  • Outlet/Receptacle Type: IEC-320 C13
    • There are no reviews for this product.

    © 2024 Microcad Computer Corporation. All Rights Reserved.