Tripp Lite PowerVerter APSINT2012 Power Inverter

Tripp Lite PowerVerter APSINT2012 Power Inverter (APSINT2012)

12 V DC - 230 V AC - Continuous Power:2 kW

$1,174.26 Out of Stock
Quantity:

Description

Tripp Lite's APSINT2012 DC-to-AC inverter with automatic line-to-battery transfer and integrated charging system serves as an extended run UPS, a standalone power source or an automotive inverter. Supplies up to 2000 watts of continuous 230V AC power from any 12V battery or automotive DC source. When hardwire AC input is energized, commercial power passes through to connected equipment and the battery set is recharged via 3 stage, selectable 15/60 amp charging system. In UPS mode, the APS system responds to blackouts and voltage fluctuations with a near instantaneous automatic transfer to battery-derived AC output. Includes a set of high current DC input terminals for simple installation (user supplies batteries and cabling - see owner's manual for recommendations). Passes sine wave utilty or generator power during battery charging and UPS line power operation, plus efficient PWM sine wave AC output in inverter and UPS backup modes. Reliable large transformer design, with frequency control powers resistive electronic loads or large inductive motors, compressors and other items with high current needs on startup. Optional APSRM4 wired remote power switch with full status LEDs provides remote power inverter on/off switching and continuous status information (APSRM4 sold separate). Supports an unlimited amount of runtime with any number of user-supplied

Main Features

  • Plug/Connector Type: Hardwired
  • Receptacles: Hardwired
  • Status Indicators:
  • Set of 6 LEDs offer continuous status information on load percentage (6 levels reported)
  • Battery charge level (7 levels reported)
  • Input Voltage: 12 V DC
  • Input Voltage: 230 V AC
  • Input Voltage Range: 10 to 15 V DC
  • Output Voltage: 230 V AC
  • Output Voltage: 12 V DC
  • Frequency: 50 Hz ±0.3Hz
  • Input Current: 192 A @ 12 V DC
  • Input Current: 38 A @ 230 V AC
  • Load Capacity: 2 kW Continuous Power / 4 kW Peak Power
  • Waveform Type: Pulse-width Modulated Sine Wave
  • Switching Time: 6 ms
  • Temperature: 32°F (0°C) to 104°F (40°C) Operating
  • Humidity: 0% to 90% Non-condensing Relative Humidity Operating
  • Color: Black
  • Dimensions: 178 mm Height x 216 mm Width x 356 mm Depth
  • Weight (Approximate): 19 kg
  • Additional Information:
  • Cooling method: Fan
  • AC Output: 230 VAC nominal
  • DC Charger Output: 12 VDC nominal
  • AC Input: 230 VAC
  • DC Input: Requires 12 VDC input source capable of delivering 192 A
  • DC Input connection type: Set of 2 DC bolt-down terminals
  • AC Input connection type: Hardwire via built in junction box with cover plate
  • Transfer time from line power to battery mode: 4 to 6 milliseconds
  • Low voltage transfer to battery power: User configurable to 144V, 163V, 182V & 201V
  • High voltage transfer to battery power: User configurable to 259 to 278V
  • Overload protection: Includes 10A input breaker dedicated to the charging system and 15A output breaker for AC output loads
  • Package Contents:
  • APS PowerVerter INT APSINT2012 Power Inverter With Charger
  • APSINT2012 Inverter/Charger
  • Instruction manual with warranty information
  • Compatibility:

    Compatible with marine, automotive, telecom, computer, emergency and a variety of other applications.

    • Package Contents

  • APS PowerVerter INT APSINT2012 Power Inverter With Charger
  • APSINT2012 Inverter/Charger
  • Instruction manual with warranty information

    • General Information

    Product TypePower Inverter
    Product SeriesAPS
    Brand NameTripp Lite
    ManufacturerTripp Lite
    Product ModelAPSINT2012
    Product NameAPS PowerVerter INT APSINT2012 Power Inverter With Charger
    Product LinePowerVerter
    Manufacturer Part NumberAPSINT2012
    Manufacturer Website Addresswww.tripplite.com
    Marketing Information

    Tripp Lite's APSINT2012 DC-to-AC inverter with automatic line-to-battery transfer and integrated charging system serves as an extended run UPS, a standalone power source or an automotive inverter. Supplies up to 2000 watts of continuous 230V AC power from any 12V battery or automotive DC source. When hardwire AC input is energized, commercial power passes through to connected equipment and the battery set is recharged via 3 stage, selectable 15/60 amp charging system. In UPS mode, the APS system responds to blackouts and voltage fluctuations with a near instantaneous automatic transfer to battery-derived AC output. Includes a set of high current DC input terminals for simple installation (user supplies batteries and cabling - see owner's manual for recommendations). Passes sine wave utilty or generator power during battery charging and UPS line power operation, plus efficient PWM sine wave AC output in inverter and UPS backup modes. Reliable large transformer design, with frequency control powers resistive electronic loads or large inductive motors, compressors and other items with high current needs on startup. Optional APSRM4 wired remote power switch with full status LEDs provides remote power inverter on/off switching and continuous status information (APSRM4 sold separate). Supports an unlimited amount of runtime with any number of user-supplied

    Technical Information

    ReceptaclesHardwired
    Plug/Connector TypeHardwired
    Status Indicators
  • Set of 6 LEDs offer continuous status information on load percentage (6 levels reported)
  • Battery charge level (7 levels reported)

    • Power Description

    Input Voltage Range10 to 15 V DC
    Frequency50 Hz ±0.3Hz
    Input Current38 A @ 230 V AC
    Load Capacity2 kW Continuous Power / 4 kW Peak Power
    Switching Time6 ms
    Waveform TypePulse-width Modulated Sine Wave
    Input Voltage230 V AC
    Output Voltage12 V DC

    Environmental Conditions

    Humidity0% to 90% Non-condensing Relative Humidity Operating
    Temperature32°F (0°C) to 104°F (40°C) Operating

    Physical Characteristics

    ColorBlack
    Dimensions178 mm Height x 216 mm Width x 356 mm Depth
    Weight (Approximate)19 kg

    Miscellaneous

    Compatibility

    Compatible with marine, automotive, telecom, computer, emergency and a variety of other applications.

    Package Contents
  • APS PowerVerter INT APSINT2012 Power Inverter With Charger
  • APSINT2012 Inverter/Charger
  • Instruction manual with warranty information
    • Additional Information
  • Cooling method: Fan
  • AC Output: 230 VAC nominal
  • DC Charger Output: 12 VDC nominal
  • AC Input: 230 VAC
  • DC Input: Requires 12 VDC input source capable of delivering 192 A
  • DC Input connection type: Set of 2 DC bolt-down terminals
  • AC Input connection type: Hardwire via built in junction box with cover plate
  • Transfer time from line power to battery mode: 4 to 6 milliseconds
  • Low voltage transfer to battery power: User configurable to 144V, 163V, 182V & 201V
  • High voltage transfer to battery power: User configurable to 259 to 278V
  • Overload protection: Includes 10A input breaker dedicated to the charging system and 15A output breaker for AC output loads
    • There are no reviews for this product.

    © 2024 Microcad Computer Corporation. All Rights Reserved.