Tripp Lite Smart Online, SU10000RT3U, Expandable 10kVA Tower/Rack-mountable UPS System

Tripp Lite Smart Online, SU10000RT3U, Expandable 10kVA Tower/Rack-mountable UPS System (SU10000RT3U)

6 Minute Full Load - 10kVA - SNMP Manageable

$8,502.10 Out of Stock
Quantity:

Description

10,000VA (10kVA) on-line, double-conversion UPS system for critical server, network and telecommunications equipment. Installs in only 6 rack spaces (3U power module and 3U battery pack); maximum installed rack depth of 32.5 in. Expandable battery runtime with optional BP240V10RT3U external battery packs. Full-time sine wave 200, 208, 220, 230, or 240V +/-2% output. Actively converts raw incoming AC power to DC, then re-converts output back to completely regulated, filtered AC output. Operates continuously without consuming battery power during brownouts to 156V and overvoltages to 276V. Standard 3-wire 208V hardwire input connection; NEMA L6-30R and L6-20R output receptacles. Detachable input-output PDU module with manual bypass switch enables hot-swap UPS replacement without disrupting power to connected equipment. Network-grade AC surge and noise suppression. Zero transfer time between AC and battery operation. Network management interfaces support communications via RS-232, contact-closure port and optional SNMPWEBCARD slot. Supports detailed monitoring of equipment load levels, self-test data and utility power conditions via network interfaces. Includes PowerAlert monitoring software and complete cabling. Emergency Power Off (EPO) interface. Front panel LEDs provide at-a-glance confirmation of line power status, battery power status, AC-to-DC conv

Main Features

  • Plug/Connector Type: Hardwired
  • Receptacles: 2 x NEMA L6-30R
  • Receptacles: 4 x NEMA L6-20R
  • Switching Time: 0 ns
  • Load Capacity: 10 kVA/8 kW
  • Input Voltage: 220 V AC
  • Input Voltage Range: 200 V AC
  • Input Voltage Range: 208 V AC
  • Input Voltage Range: 230 V AC
  • Input Voltage Range: 240 V AC
  • Output Voltage: 200 V AC User Selectable
  • Output Voltage: 220 V AC User Selectable
  • Output Voltage: 208 V AC Nominal
  • Output Voltage: 230 V AC User Selectable
  • Output Voltage: 240 V AC User Selectable
  • Frequency: 50 Hz
  • Frequency: 60 Hz
  • Waveform Type: Sine Wave
  • Filtering: EMI / RFI
  • Modules: Power Module
  • Modules: Battery Module
  • Network Management: SNMP Manageable Optional
  • Alarm: Backup Operation
  • Alarm: Low Battery
  • Alarm: Output Overload
  • Alarm: Inverter Fault
  • Alarm: DC Bus Fault
  • Alarm: Over Temperature
  • Alarm: Remote Shutdown
  • Alarm: Shutdown Complete
  • Alarm: UPS Start
  • Alarm: Imminent Shutdown
  • Bypass Switch: Manual
  • Emergency Power OFF: Yes
  • Status Indicators:

    LED Display:

  • Line power
  • Bypass
  • Inverter
  • Charger
  • Output AC
  • Battery operation

  • Batteries: User-replaceable Hot-swappable
  • Backup/Run Time: 0.10 Hour 8 kW Full Load
  • Backup/Run Time: 0.20 Hour 4 kW Half Load
  • Battery Life: 35063.25 Hour to 52594.88 Hour
  • Battery Recharge Time: 8 Hour
  • Temperature: 32°F (0°C) to 104°F (40°C) Operating
  • Temperature: 5°F (-15°C) to 122°F (50°C) Storage
  • Humidity: 0 to 95% Non-condensing Relative Humidity
  • Thermal Dissipation: 3022 BTU/h
  • Cooling Type: Fan
  • Color: Black
  • Form Factor: 6U Tower/Rack Mountable
  • Package Contents:
  • Smart Online, SU10000RT3U, Expandable 10kVA Tower/Rack-mountable UPS System
  • 3U power module with detachable hot-swap PDU input/output panel and bypass switch
  • 3U external battery pack
  • Two sets of 4-post rackmount rails (one for each of the 3U components)
  • One set of tower stands for upright tower con
  • Additional Information:
  • Switches: Includes main power off/on switch, plus 2 switches to set and execute scrollable LCD functions
  • Low voltage transfer to battery power: Maintains continuous operation during undervoltages as low as 156VAC, below this point, output is maintained utilizing battery reserves
  • High voltage transfer to battery power: Maintains continuous operation during overvoltages to 276V AC, above this point, output is maintained utilizing battery reserves
  • Cold Start: Yes, inverter can be "cold started" to enable temporary AC output during a power failure
  • Voltage regulation description: On-line, double-conversion process give this UPS the ability to maintain output voltage within +/-2% of selected nominal voltage at all times
  • Certifications & Standards:

    Tested to UL1778 (USA), CSA (Canada), CE (European Union), NOM (Mexico), Class A (Emissions)

  • Software Included: PowerAlert Software
  • Standard Warranty: 2 Year

    • Package Contents

  • Smart Online, SU10000RT3U, Expandable 10kVA Tower/Rack-mountable UPS System
  • 3U power module with detachable hot-swap PDU input/output panel and bypass switch
  • 3U external battery pack
  • Two sets of 4-post rackmount rails (one for each of the 3U components)
  • One set of tower stands for upright tower con

    • General Information

    Product TypeDual Conversion Online UPS
    Brand NameTripp Lite
    ManufacturerTripp Lite
    Product ModelSU10000RT3U
    Product NameSmart Online, SU10000RT3U, Expandable 10kVA Tower/Rack-mountable UPS System
    Product LineSmartOnline
    Manufacturer Part NumberSU10000RT3U
    Manufacturer Website Addresswww.tripplite.com
    Marketing Information

    10,000VA (10kVA) on-line, double-conversion UPS system for critical server, network and telecommunications equipment. Installs in only 6 rack spaces (3U power module and 3U battery pack); maximum installed rack depth of 32.5 in. Expandable battery runtime with optional BP240V10RT3U external battery packs. Full-time sine wave 200, 208, 220, 230, or 240V +/-2% output. Actively converts raw incoming AC power to DC, then re-converts output back to completely regulated, filtered AC output. Operates continuously without consuming battery power during brownouts to 156V and overvoltages to 276V. Standard 3-wire 208V hardwire input connection; NEMA L6-30R and L6-20R output receptacles. Detachable input-output PDU module with manual bypass switch enables hot-swap UPS replacement without disrupting power to connected equipment. Network-grade AC surge and noise suppression. Zero transfer time between AC and battery operation. Network management interfaces support communications via RS-232, contact-closure port and optional SNMPWEBCARD slot. Supports detailed monitoring of equipment load levels, self-test data and utility power conditions via network interfaces. Includes PowerAlert monitoring software and complete cabling. Emergency Power Off (EPO) interface. Front panel LEDs provide at-a-glance confirmation of line power status, battery power status, AC-to-DC conv

    Technical Information

    Receptacles4 x NEMA L6-20R
    Plug/Connector TypeHardwired
    Switching Time0 ns

    Power Description

    Input Voltage Range240 V AC
    FilteringEMI / RFI
    Frequency60 Hz
    Load Capacity10 kVA/8 kW
    Waveform TypeSine Wave
    Input Voltage220 V AC
    Output Voltage240 V AC User Selectable

    Scalability

    ModulesBattery Module

    Management

    AlarmImminent Shutdown
    Bypass SwitchManual
    Emergency Power OFFYes
    Network ManagementSNMP Manageable Optional

    Controls/Indicators

    Status Indicators

    LED Display:

  • Line power
  • Bypass
  • Inverter
  • Charger
  • Output AC
  • Battery operation

    • Battery Information

    BatteriesUser-replaceable Hot-swappable
    Backup/Run Time0.20 Hour 4 kW Half Load
    Battery Life35063.25 Hour to 52594.88 Hour
    Battery Recharge Time8 Hour

    Environmental Conditions

    Cooling TypeFan
    Humidity0 to 95% Non-condensing Relative Humidity
    Temperature5°F (-15°C) to 122°F (50°C) Storage
    Thermal Dissipation3022 BTU/h

    Physical Characteristics

    ColorBlack
    Form Factor6U Tower/Rack Mountable

    Miscellaneous

    Certifications & Standards

    Tested to UL1778 (USA), CSA (Canada), CE (European Union), NOM (Mexico), Class A (Emissions)

    Package Contents
  • Smart Online, SU10000RT3U, Expandable 10kVA Tower/Rack-mountable UPS System
  • 3U power module with detachable hot-swap PDU input/output panel and bypass switch
  • 3U external battery pack
  • Two sets of 4-post rackmount rails (one for each of the 3U components)
  • One set of tower stands for upright tower con
    • Software IncludedPowerAlert Software
    Additional Information
  • Switches: Includes main power off/on switch, plus 2 switches to set and execute scrollable LCD functions
  • Low voltage transfer to battery power: Maintains continuous operation during undervoltages as low as 156VAC, below this point, output is maintained utilizing battery reserves
  • High voltage transfer to battery power: Maintains continuous operation during overvoltages to 276V AC, above this point, output is maintained utilizing battery reserves
  • Cold Start: Yes, inverter can be "cold started" to enable temporary AC output during a power failure
  • Voltage regulation description: On-line, double-conversion process give this UPS the ability to maintain output voltage within +/-2% of selected nominal voltage at all times

    • Warranty

    Standard Warranty2 Year
    There are no reviews for this product.

    © 2024 Microcad Computer Corporation. All Rights Reserved.