Power Equipment > UPS > General Purpose UPS

Tripp Lite SmartPro 500VA Rack/Tower UPS (SMART500RT1U)

500VA/300W - 5 Minute Full Load - 7 x NEMA 5-15R

$339.43	In Stock
Quantity:

Overview
Specifications
Reviews (8)

Description

Tripp Lite's SMART500RT1U intelligent, line interactive rack/tower uninterruptible power supply prevents data loss, downtime and equipment damage due to power outages, voltage fluctuations and transient surges. Requires only one rack space (1U) in a 2 or 4 post rack, with included accessories for upright tower placement. Large internal batteries offer 8 minutes half load runtime and 3 minutes at full load. Maintains regulated 120V nominal output without using battery power during brownouts as low as 90V. 500VA/300 watt power handling capability is compatible with networking, telecom and other sensitive electronic applications. Includes 6 UPS supported outlets with a single outlet load bank that can be individually controlled via software interface to reboot select equipment on demand or shed less significant loads to extend battery runtime for more critical equipment. Includes 1 surge-only outlet for peripherals not requiring battery backup. Supports simultaneous remote monitoring of UPS and site power conditions via built-in USB and DB9 monitoring ports. Includes PowerAlert UPS monitoring and unattended shutdown software with complete cabling. Built-in accessory slot supports SNMP with optional SNMPWEBCARD adapter. Emergency Power Off (EPO) interface offers option for instantaneous power-off of UPS and connected equipment in the case of fire or emergency situation. Multi-function audible alarms and set of 5 front panel LEDs offer at-a-glance notification of UPS and line power status. Network-grade AC surge suppression protects equipment from damage and performance problems resulting from transient surges and line noise. Attractive all-black color scheme. Two year warranty with $250,000 connected equipment insurance (USA & Canada only).

Main Features

Plug/Connector Type: NEMA 5-15P

Receptacles: 7 x NEMA 5-15R

Switching Time: 4 ms

Load Capacity: 500 VA/300 W

Input Voltage: 110 V AC

Input Voltage Range: 120 V AC Single-phase

Output Voltage: 120 V AC Single-phase

Frequency: 60 Hz

Waveform Type: Pulse-width Modulated Sine Wave

Surge Energy Rating: 480 J

Filtering: EMI / RFI

Network Management: SNMP Manageable Optional

Overload Protection:

Via 15A input breaker

Alarm: On Battery

Alarm: Overload

Alarm: UPS Fault

Alarm: Low Battery

Emergency Power OFF: Yes

Status Indicators: 5 front panel LEDs - Green POWER LED, 3 color BATTERY CHARGE LED, 3 color OUTPUT LOAD LEVEL LED, red BATTERY WARNING LED.

Interfaces/Ports: 1 x USB

Interfaces/Ports: 1 x DB-9 Serial

Modular Slots: 4 x Communications Slot

Batteries: Sealed Lead Acid User-replaceable Hot-swappable

Backup/Run Time: 0.08 Hour 500 W Full Load

Backup/Run Time: 0.28 Hour 250 W Half Load

Battery Life: 26297.44 Hour to 52594.88 Hour

Battery Recharge Time: 4 Hour

Temperature: 32°F (0°C) to 104°F (40°C) Operating

Temperature: 5°F (-15°C) to 122°F (50°C)

Humidity: 0 to 95% Non-condensing Relative Humidity

Color: Black

Form Factor: 1U Tower/Rack Mountable

Power Cord/Cable: 3.05 m

Dimensions: 445 mm Width x 298 mm Depth

Weight (Approximate): 8.53 kg

Package Contents:

SMART500RT1U UPS System

Mounting hardware

Cabling for USB & DB9 monitoring and EPO switching

PowerAlert unattended shutdown and UPS/Power monitoring software

Warranty information and instruction manual

Additional Information:

SMART500RT1U line interactive UPS offers battery derived sine wave AC output during power outages, voltage regulation during brownouts, plus network-grade AC surge suppression

500VA / 300 watt power handling capability compatibile with networking, telecom and other sensitive electronic devices

Supports 1U rackmount installation in 2 or 4 post rack enclosures, upright tower placement also supported - mounting accessories included

Large internal batteries offer runtimes of 17 minutes at half load (250VA / 150 watts) and 5 minutes at full load (500VA / 300 watts)

Maintains regulated 120V nominal output during brownouts as low as 90V

Includes 6 UPS-supported outlets, with one single outlet load bank that can be powered off and back on again via software interface. One additional surge-only outlet powers accessories not requiring battery support

PowerAlert UPS monitoring and unattended shutdown software enables configurable network broadcast messaging, pager & email notification, event logging and running user-defined script commands

Offers simultaneous monitoring by up to 3 directly-connected devices through included USB, DB9 and SNMP* interfaces (*requires optional SNMPWEBCARD), or the monitoring of any number of additional UPS systems over IP with included PowerAlert monitoring software. Free PowerAlert enterprise management software is also available for select opportunities

Communications ports support messaging of UPS and line power status, including on-battery, low-battery, power restored, AC line voltage, DC battery voltage and remaining battery capacity

Supports timed inverter shutoff after unattended shutdown, activate self-test and UPS output power control for scheduled or immediate reboot of connected devices

Supports Tripp Lite's WatchDog software application to restore unresponsive programs by systematically restarting applications, operating systems and ultimately rebooting completely locked computers by momentarily switching UPS power off and back on again (requires optional WATCHDOGSW)

Built-in accessory slot supports SNMP with optional SNMPWEBCARD adapter

Emergency Power Off (EPO) interface with cable

Multi-function audible alarms and set of 5 front panel LEDs

Network-grade AC surge suppression

Attractive all-black color scheme

UPS battery set ships fully assembled and ready for installation, no time consuming connection of internal batteries by user is necessary

Two year warranty with $250,000 connected equipment insurance (USA & Canada only)

System Requirements: TYPICAL APPLCIATIONS:
Ideal for protection of fileservers, network accessories and telecommunications equipment in server rooms, internetworking closets, co-location racks, kiosks and a variety of other locations. Common applications include any mix of servers, workstations, hubs, routers, concentrators, IP telephony and traditional PBX switching systems.

Software Included: PowerAlert Software

Standard Warranty: 2 Year

Package Contents

SMART500RT1U UPS System

Mounting hardware

Cabling for USB & DB9 monitoring and EPO switching

PowerAlert unattended shutdown and UPS/Power monitoring software

Warranty information and instruction manual

General Information

Product Type	Line-interactive UPS
Brand Name	Tripp Lite
Manufacturer	Tripp Lite
Product Name	SmartPro 500VA Rack/Tower UPS
Product Line	SmartPro
Manufacturer Part Number	SMART500RT1U
Manufacturer Website Address	www.tripplite.com
Marketing Information	Tripp Lite's SMART500RT1U intelligent, line interactive rack/tower uninterruptible power supply prevents data loss, downtime and equipment damage due to power outages, voltage fluctuations and transient surges. Requires only one rack space (1U) in a 2 or 4 post rack, with included accessories for upright tower placement. Large internal batteries offer 8 minutes half load runtime and 3 minutes at full load. Maintains regulated 120V nominal output without using battery power during brownouts as low as 90V. 500VA/300 watt power handling capability is compatible with networking, telecom and other sensitive electronic applications. Includes 6 UPS supported outlets with a single outlet load bank that can be individually controlled via software interface to reboot select equipment on demand or shed less significant loads to extend battery runtime for more critical equipment. Includes 1 surge-only outlet for peripherals not requiring battery backup. Supports simultaneous remote monitoring of UPS and site power conditions via built-in USB and DB9 monitoring ports. Includes PowerAlert UPS monitoring and unattended shutdown software with complete cabling. Built-in accessory slot supports SNMP with optional SNMPWEBCARD adapter. Emergency Power Off (EPO) interface offers option for instantaneous power-off of UPS and connected equipment in the case of fire or emergency situation. Multi-function audible alarms and set of 5 front panel LEDs offer at-a-glance notification of UPS and line power status. Network-grade AC surge suppression protects equipment from damage and performance problems resulting from transient surges and line noise. Attractive all-black color scheme. Two year warranty with $250,000 connected equipment insurance (USA & Canada only).

Technical Information

Receptacles	7 x NEMA 5-15R
Plug/Connector Type	NEMA 5-15P
Switching Time	4 ms

Power Description

Input Voltage Range	120 V AC Single-phase
Filtering	EMI / RFI
Frequency	60 Hz
Load Capacity	500 VA/300 W
Surge Energy Rating	480 J
Waveform Type	Pulse-width Modulated Sine Wave
Input Voltage	110 V AC
Output Voltage	120 V AC Single-phase

Management

Alarm	Low Battery
Emergency Power OFF	Yes
Network Management	SNMP Manageable Optional
Overload Protection	Via 15A input breaker

Controls/Indicators

Status Indicators

5 front panel LEDs - Green POWER LED, 3 color BATTERY CHARGE LED, 3 color OUTPUT LOAD LEVEL LED, red BATTERY WARNING LED.

Interfaces/Ports

Modular Slots	4 x Communications Slot
Interfaces/Ports	1 x DB-9 Serial

Battery Information

Batteries	Sealed Lead Acid User-replaceable Hot-swappable
Backup/Run Time	0.28 Hour 250 W Half Load
Battery Life	26297.44 Hour to 52594.88 Hour
Battery Recharge Time	4 Hour

Environmental Conditions

Humidity	0 to 95% Non-condensing Relative Humidity
Temperature	5°F (-15°C) to 122°F (50°C)

Physical Characteristics

Color	Black
Form Factor	1U Tower/Rack Mountable
Power Cord/Cable	3.05 m
Dimensions	445 mm Width x 298 mm Depth
Weight (Approximate)	8.53 kg

Miscellaneous

System Requirements	TYPICAL APPLCIATIONS: Ideal for protection of fileservers, network accessories and telecommunications equipment in server rooms, internetworking closets, co-location racks, kiosks and a variety of other locations. Common applications include any mix of servers, workstations, hubs, routers, concentrators, IP telephony and traditional PBX switching systems.
Package Contents	SMART500RT1U UPS System Mounting hardware Cabling for USB & DB9 monitoring and EPO switching PowerAlert unattended shutdown and UPS/Power monitoring software Warranty information and instruction manual
Software Included	PowerAlert Software
Additional Information	SMART500RT1U line interactive UPS offers battery derived sine wave AC output during power outages, voltage regulation during brownouts, plus network-grade AC surge suppression 500VA / 300 watt power handling capability compatibile with networking, telecom and other sensitive electronic devices Supports 1U rackmount installation in 2 or 4 post rack enclosures, upright tower placement also supported - mounting accessories included Large internal batteries offer runtimes of 17 minutes at half load (250VA / 150 watts) and 5 minutes at full load (500VA / 300 watts) Maintains regulated 120V nominal output during brownouts as low as 90V Includes 6 UPS-supported outlets, with one single outlet load bank that can be powered off and back on again via software interface. One additional surge-only outlet powers accessories not requiring battery support PowerAlert UPS monitoring and unattended shutdown software enables configurable network broadcast messaging, pager & email notification, event logging and running user-defined script commands Offers simultaneous monitoring by up to 3 directly-connected devices through included USB, DB9 and SNMP* interfaces (*requires optional SNMPWEBCARD), or the monitoring of any number of additional UPS systems over IP with included PowerAlert monitoring software. Free PowerAlert enterprise management software is also available for select opportunities Communications ports support messaging of UPS and line power status, including on-battery, low-battery, power restored, AC line voltage, DC battery voltage and remaining battery capacity Supports timed inverter shutoff after unattended shutdown, activate self-test and UPS output power control for scheduled or immediate reboot of connected devices Supports Tripp Lite's WatchDog software application to restore unresponsive programs by systematically restarting applications, operating systems and ultimately rebooting completely locked computers by momentarily switching UPS power off and back on again (requires optional WATCHDOGSW) Built-in accessory slot supports SNMP with optional SNMPWEBCARD adapter Emergency Power Off (EPO) interface with cable Multi-function audible alarms and set of 5 front panel LEDs Network-grade AC surge suppression Attractive all-black color scheme UPS battery set ships fully assembled and ready for installation, no time consuming connection of internal batteries by user is necessary Two year warranty with $250,000 connected equipment insurance (USA & Canada only)

Warranty

Standard Warranty

2 Year

February 14, 2011 Dan-O says:

I use this for my digital mixer, digital preamps and wordclock generator, to prevent damage or thump noise in case of power failures or brownouts.

February 14, 2011 Dan-O says:

Pros:: Easy to setup,, Reliable,, Small footprint I use this for my digital mixer, digital preamps and wordclock generator, to prevent damage or thump noise in…

December 8, 2010 John says:

My use for this UPS was simple... I needed a constant power source for a light load (FM Tuner) in an outdoor rack. It worked great. When I installed it the outside temp was around 30 degrees (I'm sure the unit was warmer since it had been in the car)... it powered up with no hint of a problem.

December 8, 2010 John says:

Pros:: Easy to setup,, Good power output,, Reliable,, Small footprint My use for this UPS was simple... I needed a constant power source for a light load (FM Tuner)…

November 16, 2008 Anonymous says:

Pros: Great price on 300 Watt 1 RU unit. I have 6, all work well.

Cons: Not really a con but it's only 300 watts. It can be overloaded but then again, it works within its design parameters perfectly.

Great price on 300 Watt 1 RU unit. I have 6, all work well. Not really a con but it's only 300 watts. It can be overloaded but then again, it works within its design parameters perfectly.

November 5, 2008 Nickw says:

Pros: Great rack mountable UPS. Easy to install and maintain. Tested with 10% load and it lasted just over 3 hours.

Cons: I wish it included the web card. Webcard is way overpriced for not having any advanced features

Great rack mountable UPS. Easy to install and maintain. Tested with 10% load and it lasted just over 3 hours. I wish it included the web card. Webcard is way overpriced for not having any advanced features Would purchase another

October 25, 2007 ifixit says:

Pros: Mounts easily in short-depth racks, making it fit in nicely with network switches or audio gear. Cheap.

Cons: No network support. Unless there is a PC nearby, forget about monitoring this UPS.

Mounts easily in short-depth racks, making it fit in nicely with network switches or audio gear. Cheap. No network support. Unless there is a PC nearby, forget about monitoring this UPS. At writing, have had one of these mounted on a wall, 20 feet off the floor of a plastics factory for about 2 years, powering some small network hardware.

It continues to work fine,

December 13, 2006 Anonymous says:

Pros: Low cost

Cons: For those who have a backup generator this UPS does not have any kind of sensitivity setting at all. Which means it will NOT cycle onto generator power unless it's perfect.

Low cost For those who have a backup generator this UPS does not have any kind of sensitivity setting at all. Which means it will NOT cycle onto generator power unless it's perfect. I bought this to power my switches, bad idea. They crashed after this UPS would not kick over to the generator power.