Tripp Lite SmartPro 750RM1U UPS (SMART750RM1U)

Tripp Lite's SMART750RM1U intelligent, line interactive rack/tower uninterruptible power supply prevents data loss, downtime and equipment damage due to power outages, voltage fluctuations and transient surges. Requires only one rack space (1U) in a standard rack enclosure, with included accessories for upright tower placement. Large internal batteries offer 24 minutes half load runtime and 7 minutes at full load. Maintains regulated 120V nominal output without using battery power during brownouts and overvoltages from 83 to 147V. 750VA / 450 watt power handling capability and full time sine wave output offers guaranteed compatibility with networking, telecom and other sensitive electronic applications. Includes a total of 6 outlets arranged in 2 load banks that are individually controllable via software interface to reboot select equipment on demand or automatically shed less significant loads to extend battery runtime for more critical equipment. Supports remote monitoring of UPS and site power conditions via built-in USB and DB9 monitoring ports. Includes PowerAlert UPS monitoring and unattended shutdown software with complete cabling. Built-in accessory slot supports SNMP with optional SNMPWEBCARD adapter. Emergency Power Off (EPO) interface offers option for instantaneous power-off of UPS and connected equipment in the case of fire or emergency situation. Multi-function audible alarms and set of 5 front panel LEDs offer at-a-glance notification of UPS and line power status. Network-grade AC surge suppression protects equipment from damage and performance problems resulting from transient surges and line noise. Attractive all-black color scheme. Two year warranty with $250,000 connected equipment insurance (USA & Canada only).

Plug/Connector Type: NEMA 5-15P

Receptacles: 6 x NEMA 5-15R

Load Capacity: 750 VA/450 W

Input Voltage: 110 V AC

Input Voltage Range: 120 V AC Single-phase

Output Voltage: 120 V AC Single-phase

Frequency: 60 Hz

Waveform Type: Sine Wave

Filtering: EMI / RFI

Network Management: SNMP Manageable Optional

Overload Protection: 15A input breaker

Alarm: On Battery

Alarm: Overload

Alarm: Low Battery

Emergency Power OFF: Yes

Status Indicators: 5 front panel LEDs - Green POWER LED, 3 color BATTERY CHARGE LED, 3 color OUTPUT LOAD LEVEL LED, red BATTERY WARNING LED.

Interfaces/Ports: 1 x DB-9

Interfaces/Ports: 1 x USB

Modular Slots: 1 x Communications Slot

Batteries: Sealed Lead Acid User-replaceable Hot-swappable

Backup/Run Time: 0.12 Hour 750 W Full Load

Backup/Run Time: 0.40 Hour 375 W Half Load

Battery Life: 26297.44 Hour to 52594.88 Hour

Battery Recharge Time: 4 Hour

Temperature: 32°F (0°C) to 104°F (40°C) Operating

Humidity: 0 to 95% Non-condensing Relative Humidity

Form Factor: 1U Rack-mountable

Power Cord/Cable: 3.05 m

Dimensions: 44.45 mm Height x 445 mm Width x 425 mm Depth

Weight (Approximate): 13.61 kg

Package Contents:

SMART750RM1U UPS System

Mounting hardware

Cabling for USB & DB9 monitoring and EPO switching

PowerAlert unattended shutdown and UPS/Power monitoring software

Warranty information and instruction manual

Additional Information:

SMART750RM1U line interactive UPS offers battery derived sine wave AC output during power outages, voltage regulation during brownouts and overvoltages, plus network-grade AC surge suppression

750VA / 450 watt power handling capability with full-time sine wave output offers guaranteed compatibility with networking, telecom and other sensitive electronic devices

Supports 1U rackmount installation in 2 or 4 post rack enclosures, upright tower placement also supported

Large internal batteries offer runtimes of 24 minutes at half load (350VA / 225 watts) and 7 minutes at full load (750VA / 450 watts)

Maintains regulated 120V nominal output during brownouts and overvoltages from 83 to 147V

Includes 6 UPS-supported outlets arranged in 2 individually controllable load banks (2 outlets per bank) that can be powered off and back on again via software interface

PowerAlert UPS monitoring and unattended shutdown software enables configurable network broadcast messaging, pager & email notification, event logging and running user-defined script commands

Offers simultaneous monitoring by up to 3 directly-connected devices through included USB, DB9 and SNMP* interfaces (*requires optional SNMPWEBCARD), or the monitoring of any number of additional UPS systems over IP with included PowerAlert monitoring software. Free PowerAlert enterprise management software is also available for select opportunies

Communications ports support messaging of UPS and line power status, including on-battery, low-battery, power restored, AC line voltage, DC battery voltage and remaining battery capacity

Supports timed inverter shutoff after unattended shutdown, activate self-test and UPS output power control for scheduled or immediate reboot of connected devices

Supports Tripp Lite's WatchDog software application to restore unresponsive programs by systematically restarting applications, operating systems and ultimately rebooting completely locked computers by momentarily switching UPS power off and back on again (requires optional WATCHDOGSW)

Built-in accessory slot supports SNMP with optional SNMPWEBCARD adapter

Emergency Power Off (EPO) interface with cable

Multi-function audible alarms and set of 5 front panel LEDs

Network-grade AC surge suppression

Attractive all-black color scheme

UPS battery set ships fully assembled and ready for installation, no time consuming connection of internal batteries by user is necessary

Two year warranty with $250,000 connected equipment insurance (USA & Canada only)

System Requirements: TYPICAL APPLICATIONS: Ideal for rackmount, wallmount or under-counter protection of fileservers, network accessories and telecommunications equipment in server rooms, internetworking closets, co-location racks, kiosks and a variety of other locations. Common applications include any mix of servers, workstations, hubs, routers, concentrators, IP telephony and traditional PBX switching systems.

Certifications & Standards: UL1778 (USA), cUL (Canada), FCC Class A (emissions), NOM (Mexico), Conforms to IEEE 587 / ANSI C62.41 specifications

Standard Warranty: 2 Year